Thingiverse
Ugly Tyro69
by MercyBeat
5
Downloads
5
Likes
0
Makes
First stab at something for the Tyro69. It's ugly but it works and I've bounced it off a bunch of walls and ceilings with out it breaking.
Frsky xm+ is shrink wrapped and sits on top of the VTX. Held in place with electric tape.
I also put a small strip of foam in the top and bottom of the camera mount.
Using a zip-tie to hold the camera mount together and a zip-tie to keep the vtx antenna in place.
The screws that come with the tyro69 should touch the bottom of the mount. This should force the nut down locking it in a little bit. Don't over tighten.
Let me know what you think.
Frsky xm+ is shrink wrapped and sits on top of the VTX. Held in place with electric tape.
I also put a small strip of foam in the top and bottom of the camera mount.
Using a zip-tie to hold the camera mount together and a zip-tie to keep the vtx antenna in place.
The screws that come with the tyro69 should touch the bottom of the mount. This should force the nut down locking it in a little bit. Don't over tighten.
Let me know what you think.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
