Ultimaker 2

Ultimaker 2 3D printer Layer resolution: up to 20 micron Build volume: 23 x 22.5 x 20.5 cm Position precision X Y Z: 12.5 / 12.5 / 5 micron Print speed: 30 mm/s - 300 mm/s Travel speed: 30 mm/s - 350 mm/s Recommended filament diameter: 2.85 mm Nozzle diameter: 0.4 mm Stand-alone SD-card printing Software: Cura - Official Ultimaker Print technology: Fused filament fabrication (FFF) AC input: 100 - 240 V / ~4 AMPS / 50 - 60 HZ / 221 watt max. Power requirements: 24 V DC @ 9.2 AMPS Usage cost: ~ €0.05 / cm3 (material and power) I have revised this model for your convenience. Original step file from the open source package is in the open source folder. Released under Created Commons License Keyshot file included (all textures applied, just drop it into your project) Special thanks to Ultimaker https://www.ultimaker.com/products/ultimaker-2?gclid=CjgKEAjw-6WcBRCsgNjFy-2OuGYSJADf4R2sQfUF5oB4V0F8EDm1GukOjMXL3r9hYIJ6tdcA2H323PD_BwE https://grabcad.com/daniel.noree for his filament spool 2560 x 1600 and 1920 x 1080 Desktop Wallpaper Images added. And as always, ENJOY! https://github.com/Ultimaker/Ultimaker2/ CC-by-NC: http://creativecommons.org/licenses/by-nc/3.0/