Ultimate MTB Fork Top Cap Socket for 1/2" Drive

This is a socket tool designed for MTB suspension fork top caps (RockShox, Fox, etc.). The default 24 mm size fits a RockShox Judy (I will add profiles with other dimensions on request). It's been in my toolbox for several years now. Recommended Print Settings Orientation: 1/2" drive side down on the build plate Walls: minimum 5 Infill: minimum 50% Cubic or Gyroid Top/Bottom: minimum 2 mm Seam Position: random (to avoid creating a structural weak point) Supports: no (sacrificial layer) Material: PLA (Solid), PETG/ASA (Heavy Duty) ⚠️ CRITICAL: SNUG FIT! 3D print material is softer than your fork's top cap. To prevent displacement of the print material under torque, the fit must be perfectly snug! If there is any play, the socket will definitely fail. So before printing the full tool, do the following: Test Print: Lower the model in your slicer so only the first 2 – 3 mm of the hex socket is above the build plate. Verify: The fit of the test ring must be perfectly tight with zero play. A