Ulysses 31 Hueforge

MembershipBoost MeProject: Ulysse 31.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 240x206.72mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.96mm and the Actual Thickness is 2.96mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 5.5 PLA Bambulab Basic Cyan Transmission Distance: 1.7 PLA BambuLab Basic Red Transmission Distance: 4This print uses 5 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Jade White At layer #9 (0.8mm) swap to Yellow At layer #10 (0.88mm) swap to Cyan At layer #11 (0.96mm) swap to Jade White At layer #13 (1.12mm) swap to Cyan At layer #15 (1.28mm) swap to Red At layer #17 (1.44mm) swap to Yellow At layer #18 (1.52mm) swap to Black At layer #19 (1.6mm) swap to Red At layer #24 (2mm) swap to Yellow