Thingiverse
Umbrella Academy
von Apex-3D
19
Downloads
9
Likes
0
Makes
Printed with CR-10 using Cura 4.1
-Filament - Tianse Black PLA
-Dimensions:
(X) - 115mm
(Y) - 115mm
(Z) - 6.5mm
-0.2mm Layer height
-Top/Bottom - 4 each
-Infill - 10% Grid
-Infill Before Walls - Disabled
-Extruder - 210c
-Bed - 60c
-Retraction - Enabled 4.5mm
-Print Speed - 60mm/s
-Infill Speed - 60mm/s
-Travel Speed - 80mm/s
-Acceleration Control - Enabled
-Build Plate Adhesion - Brim 5 line
-Print Time - 2h 57min
-29g / 9.84m
-Filament - Tianse Black PLA
-Dimensions:
(X) - 115mm
(Y) - 115mm
(Z) - 6.5mm
-0.2mm Layer height
-Top/Bottom - 4 each
-Infill - 10% Grid
-Infill Before Walls - Disabled
-Extruder - 210c
-Bed - 60c
-Retraction - Enabled 4.5mm
-Print Speed - 60mm/s
-Infill Speed - 60mm/s
-Travel Speed - 80mm/s
-Acceleration Control - Enabled
-Build Plate Adhesion - Brim 5 line
-Print Time - 2h 57min
-29g / 9.84m
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
