Umbreon Hueforge (Moonbreon)

Do not adjust the size – the colors will not turn out the same.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 145.95x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm #1c1c1c PLA PolyTerra Charcoal Black Transmission Distance: 0.3 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5 #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Charcoal Black At layer #8 (0.72mm) swap to Cyan At layer #12 (1.04mm) swap to Sunflower Yellow At layer #18 (1.52mm) swap to Jade White for the rest.