Umbreon - Hueforge

Umbreon is a fan favourite of this house, so here is one of my favourite ones that came out. They come out fairly thick so it has a nice feel to it. If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position Print at 15% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: Black Transmission Distance: 0.3BambuLab Basic Red Transmission Distance: 4Gray Transmission Distance: 3White Transmission Distance: 6Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Red At layer #15 (1.28mm) swap to Gray At layer #19 (1.6mm) swap to White for the rest. Thanks for checking this out and I hope you enjoy it!