Umbreon in gold

As usual you can resize this in X and Y Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 115x204.44mm in size You may print at higher layer heights below the Min Depth of 1.2mm The Max Depth is 3mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA+ Sunlu Orange Transmission Distance: 5 Silk PLA Overture Gold This print uses 4 unique filaments Swap Instructions: Start with Black At layer #15 (1.28mm) swap to Blue Gray At layer #17 (1.44mm) swap to Orange At layer #22 (1.84mm) swap to Gold for the rest.