UNC Basketball HueForge

UNC Basketball HueForge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.8mmThe Max allowed Thickness is 2.64mm and the Actual Thickness is 2.64mm Filaments Used:PLA BambuLab Black Transmission Distance: 0.3PLA BambuLab Basic Cyan Transmission Distance: 3.5PLA Basic Jade White Transmission Distance: 5PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #11 (0.96mm) swap to CyanAt layer #15 (1.28mm) swap to Jade WhiteAt layer #17 (1.44mm) swap to Pumpkin OrangeAt layer #24 (2.00mm) swap to Jade White for the rest. In the image of the print I skipped the black and started with Cyan. This worked well, but there were no black highlights, this print has black highlights like shown in the non-printed image.