Under desk brackets for drawer slides

For mounting trays, drawers, etc under tables and desks! Note that not all 2020 aluminium extrusions are made equal, and different vendors typically have slightly different measurements to each other. This model is specifically made to fit the 2020 V-slot extrusions found in an Ender 3 3D printer. Let me know if you want other profiles and I can upload them to the print profiles. Print orientation - IMPORTANT Please print the brackets on their side, that way the layer lines of the print will be aligned with the forces holding the trays or drawers in place. Printing the brackets with the face of the extrusion hole facing the buildplate will result in a much weaker print. Hardware needed AmountItem4 psc/bracket5mm wood screws. Length will vary depending on the table you're mounting them on3 or more pairs per extrusionM3 T-nuts and countersunk M3x6mm screws. 1 pair Drawer sliders. I used these from a local (Swedish) hardware chain. Any sliders are probably going to work just fine for this