Undertale dual tone keychains

All art belongs to Toby Fox

Read instructions before printing.

Default thickness is 3mm per layer before scaling( eg. 3mm black + 3mm white +3mm for any subsequent layers), scale accordingly in z axis or x/y. Default thickness works fine with a 100% infill(especially if your filament is not completely opaque) and a 95% flow rate/ extrusion multiplier. They were printed using a 0.4mm nozzle and the minimum part scale. You can use a finer nozzle and scale down even more if you want a actually decent sized keychain :/

Currently there are five versions(Settings below are used in the pictures):
Sans Head(Min Scale:40%)
- 3 layers Black, 3 layers White
Sans Full(Min Scale 40%)
- 3 layers Black, 3 layers White
Sans Color(Min Scale 20%)
- 3 layers Black, 3 layers White, 3 layers Blue, 3 layers Grey
Temmie(Min Scale [55%,55%,25%]
- 3 layers White, 3 layers Black
Dog (Not yet tested; NOTE: Black Background which does not fit form)
-3mm Black, 3mm White

Instructions

T