Unicorn City HueForge

Picture source/author: SandySarten @sandysartenThen used HueForge v0.8.1 to create the model. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.I made two version size the .stl file. in the printing profile is used 150x150 (for A1Mini) and the second is bigger 200x200 mm. The color change settings are identical. Do not adjust the height (Z) in your slicer! The layers would not be correct. You can only modify the X and Y dimensions. You may print at higher layer heights below the Min Depth of 0.56mm. The Max Depth is 2.1mm and the Actual Depth is 2.1mm It is possible to print without AMS by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support. Filaments Used: PLA Eleg.oo+ Black Transmission Distance: 0.3 PLA Sunlu META Grey Transmission Distance: 3.6 PLA Eleg.oo + Gray Transmission Distance: 3 PLA Eleg.oo Basic White Transmission Distance: 7This print uses 4 unique filaments Swap Instructio