Thingiverse
Unicorn Horn
by Unknown
273
Downloads
218
Likes
2
Makes
3D Printer
To print the unicorn horn, the 3D printer will need to be capable of printing a minimum of 140mm tall. The diameter of the horn is 40mm x 48mm, which should be enough to fit on most beds, such as the Printrbot Simple Metal.
For 3D printing with Ninjaflex material, we recommend using a printer with a direct direct, spring loaded extruder. The horn can be printed in PLA, ABS and other filaments.
Slicer Settings
For the best quality when printing with NinjaFlex, we recommend the following slicing settings:
Retraction: Off
Speeds: 90/150
Extruder Temp: 230c
Infill 10%
Raft+Support: Off
No Heated Bed
Print time is approximately 3 hours.
To print the unicorn horn, the 3D printer will need to be capable of printing a minimum of 140mm tall. The diameter of the horn is 40mm x 48mm, which should be enough to fit on most beds, such as the Printrbot Simple Metal.
For 3D printing with Ninjaflex material, we recommend using a printer with a direct direct, spring loaded extruder. The horn can be printed in PLA, ABS and other filaments.
Slicer Settings
For the best quality when printing with NinjaFlex, we recommend the following slicing settings:
Retraction: Off
Speeds: 90/150
Extruder Temp: 230c
Infill 10%
Raft+Support: Off
No Heated Bed
Print time is approximately 3 hours.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
