Unicorn multi color

A colored unicorn head. The coloring is in the 3MF file. The object was tilted to reduce supports. Total hight as defined for Kobra 3 was 247mm. Supports: default trees with thresold angle of <35°, Z top distance is 0,25mm. Speed setting is 200 mm/s outer & 250 mm/s inner. (can be reduced to default) All top surfaces ironing with concentric pattern (Can be neglected to speed up the print). Purge tower needed to reduce color bleeding and should be 50mm width and 50mm³ volume, with 20° cone. White filament setting should be >55-60 mm³ on purge tower to also reduce color bleeding. Purge in to support is set, don´t purge in to infill, because this can shine through. Total printing time with these settings: +28 hours. Stick with the formated coloring and add your spools accordingly. I used PLA: #1 Spool Black #2 Spool Rainbow silk #3 Spool Gold silk #4 Spool white Original work by: @Frogger_2161614