Universal arm for microphone / lamp

This is universal arm for microphone / GU5.3 lamp or anything you want.
Choose from wall mount (neet to print WALL_MOUNT and WALL_MOUNT_ARM) or desk mount (DESK_MOUNT).
Arm use 10x10mm square tubes, i use steel 1mm thick, but you can use aluminium if you want. Length is individual but 2 tubes above must be exactly same length (for me 2x48cm and 2x37cm) and holes must be precisely same too.

Printed parts must be high infill see bellow.

Assemble by fotos, remember put washers between square tubes and ARM_CONNECTS and JUNCTURE!

You also need for arm:
9x M4x25 screws
9x M4 nuts
23x M4 washers

Desk mount:
1x M6 hexagon socket head screw (individual lenght)
1x M6 lock nuts
2x M6 large size washers (designed for 22mm)

Wall mount:
1x M6x90 imbus screw
1x M6 washer
1x M6 lock nuts
2x M6 large size washers (designed for 22mm dia (not necessarily but movement is smoother)
4x M5 large sice washers (designed for 18mm dia)
4x screws to to mount it to wall or wood (