Thingiverse

Universal Blower Storage Box

by MikleVV

7 Downloads

15 Likes

0 Makes

The universal blower from here: https://www.thingiverse.com/thing:6592963 turned out to have too many parts. I had to make a special box to store them.

A printing area of at least 232x195 mm is required !!!!

Everything is printed in this orientation and without supports. After printing, you need to trim the supports on the latch. A filament thread is used as the axis of the loop, which needs to be slightly melted on both sides.

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

no supports · large print

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

232 mm (Large)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Universal Blower Storage Box?

Any FDM printer should handle Universal Blower Storage Box just fine. It's been printed on machines like Bambu Lab X1C, Prusa MK4, Creality K1 Max, Anycubic Kobra Max. A minimum build volume of 232 mm is recommended.

Does Universal Blower Storage Box need supports when printing?

No supports needed for Universal Blower Storage Box — it's designed to print clean off the bed.

What file format is Universal Blower Storage Box available in?

Universal Blower Storage Box is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Universal Blower Storage Box free to download?

Yes, Universal Blower Storage Box is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Universal Blower Storage Box

Add to Collection