Universal Car Phone Holder

Just a remix to improve the excellent original design.Removed the letters from the holder (with author permission), made a wider version and added two more arm sizes.Parts Needed:1 x Car Support (16mm/28mm)2 x Arms (60mm/67mm/70mm)If you experienced ringing with the previous design, this one got rid of it completely. That is thanks of the removal of the letters than tends to produce ringing in some printers (mine, for example)0 support needed for this printYou can use any infill or layer height, but for a strong support i recommend:layer height : 0.2infill: 100%If you have problems sliding the arms, i have a little trick that can be useful.Use some ethyl alcohol o rubbing alcohol to wet the arm and a bit inside the hole for the arm. That should help with the friction.If the arm leaves the support, you can use a small flat screwdriver to open the ending, so it doesnt exit the holder.Made with a Creality CR6.Proper credits to the original creator: https://www.thingiverse.com/seretudes/de