Universal Delta Enclosure Mount

A simple mount that I designed to be able to enclose my delta. It mounts to the outside of the extrusions and has enough space to clear the carriage wheels.

Print 6 of them (or 9 if you have a very tall delta) and affix them to the top and bottom of the towers. then measure for and cut 1/4 inch plywood or acrylic to fit. This will reduce drafts and make a HUGE improvement in structural rigidity also. you can either leave gaps at the corners (for ease of measuring/cutting) or but the panels up to themselves (for heat retention), may also work on 3030 extrusions and should work on any delta that doesn't have carriages that ride on the back of the extrusions.

designed to attach to the extrusions with 4mm bolts and T-nuts (2 per mount) and small wood screws (I used #6 drywall screws, but had to heat them up to form the threads. smaller may work a little better) to mount whatever material you use to enclose/brace the machine.

I would print 30% or more for infill and at least 3