Universal Snowboard Mount

I used 95A Tpu for the tpu inserts, 30 MMS is the best speed. Also, the mount is PLA-CF at 40% infill. Super glue (Gell) was used for gluing the tpu inserts onto the mount. A little glue goes a long way. Insert the tpu inserts onto the mount align them then lift the loose tpu flaps and coat the surface of the mount with a light coat of glue so it doesn't overflow past the sides. You will need four - 8x 2-½ sharp point drywall threaded screws. I don't think the length matters too much as long as it's around 8in long but the holes are modeled to fit the screws flush. I highly recommend using pla support filament for the interface between the mountmodel and supports. Tree supports are best. If you don't use pla support filament you will have a rough time removing supports.