Thingiverse
Universal Watchmaker's Vise
von chkstate
7
Downloads
6
Likes
0
Makes
I used this little vise for holding watches, but it should be suitable for other things too. The pegs are moveable and can be fastened just by turning them.
Parts required:
6x Bolt DIN 933 M3x16 (if you want all the holders you need 4 more, same with the nuts)
6x Nut DIN 934 M3
1x Bolt DIN 912 M5x50
1x Nut DIN 934 M5
Not required but nice to have: You can put a little spring on the M5 bolt to make the vise steady without gripping anything with it.
Depending on your prefered print orientation, some little supports might be necessary.
Parts required:
6x Bolt DIN 933 M3x16 (if you want all the holders you need 4 more, same with the nuts)
6x Nut DIN 934 M3
1x Bolt DIN 912 M5x50
1x Nut DIN 934 M5
Not required but nice to have: You can put a little spring on the M5 bolt to make the vise steady without gripping anything with it.
Depending on your prefered print orientation, some little supports might be necessary.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!