Unnamed Odroid C4 Case

This is a fairly simple little case for an Odroid C4. It is inspired by, not in any real way related to, my Low Profile Ice Tower Cooler case.

It is assembled with 8 m3 x 6-10mm screws. M3 x 8 works best, but M10 won't protrude out the side of the case and M6 won't strip threads on the first tightening... but maybe after that...

It has provisions on the top for a 40mm fan. You'll need m3 screws of an appropriate length (typically the same length as the thickness of the fan you are mounting).

I may upload a version without the fan, or at least a dummy fan to cover the hole.

It has dimples on the bottom for 8.5mm x 2.5mm silicon feet.

https://amzn.com/B07QW58TZH

It also has four holes in the bottom for m2.5 screws. These holes have the same spacing as the mounting holes on a Pi board/C4 board 49mm x 58mm. These holes can be used to mount accessory brackets to this case - such as a 2.5mm drive rails or a 75mm x 75mm VESA bracket. Like those linked below.

https://www.