Updated! Frame&mount for Waveshare 10.1DP-CAPLCD

Updated 2/28/2025: New version (no print profile, sorry) is designed a bit more robustly than the old version. The angle is more upright, as well. The LCD is heavy, so don't be stingy with your perimeter count or infill. I used 3 perimeters/20% infill on my latest print. Even 4 perimeters/25% infill wouldn't be a bad idea. The assembly info in the next paragraph is the same. The LCD frame holds the Waveshare 10.1DP-CAPLCD securely. This LCD has no features for making a physical connection to a frame, so I designed the system you see in the photos. Attach the back brace to the bottom pegs at a 45 degree angle, then rotate to vertical and slide over the upper pegs. You can put anything small through the holes in the upper pegs – tie wrap, wire, piece of filament, or even a toothpick. The LCD with microcomputer is rather heavy, so I used the BambuStudio 0.20 strength profile, with brim on, and with “normal printing” acceleration turned down to 2000.