US Flag & USMC Logo Hueforge

US Flag & USMC Logo Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.1mmThe Max Depth is 4.3mm and the Actual Depth is 3.9mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.2PLA PolyLite Blue Transmission Distance: 1.5PLA PolyLite Wine Red Transmission Distance: 1.7PLA BambuLab Basic Jade White Transmission Distance: 5.8PLA BambuLab Basic Gold Transmission Distance: 2.8PLA BambuLab Basic Silver Transmission Distance: 0.6This print uses 6 unique filaments ***attached .3mf file prints the first 6 layers at 0.16mm then the rest at 0.08mm for faster print time******the layer numbers will be different but the layer height will be the same*** Swap Instructions:Start with BlackAt layer #15 (1.28mm) swap to BlueAt layer #17 (1.44mm) swap to Wine RedAt layer #20 (1.68mm) swap to Jade WhiteAt layer #27 (2.24mm) swap to BlackAt layer #33 (2.72mm) swa