USB accessibility joystick with extra button port

This is a housing for using generic USB Arcade kits for accessibility. Any USB arcade will work as long as it uses a typical SANWA style microswitch joystick and an Easyget button to usb board. These can typically be gotten on amazon for about $20 total.

Optionally, you can re-solder the K5 - K8 button connectors to the backside of the board so you can connect additional buttons through the usb joystick. Take care not to short these connections and to rotate the connector such that the same wires connect to the same pins.

You also have the option of including a selector switch on the bottom allowing you to mechanically switch between a 4 and 8 position joystick. 8 positions is typically better, but some player may have trouble controlling between up and up-left, for example. this mechanism is dependent on the joystick you get, some have a rotating disk on the original joystick that facilitates this option, others do not.

Xbox accessibility controllers only recognize the K5 -