Thingiverse

USB and SD card holder

by 3DPrintsBuilds

99 Downloads

79 Likes

0 Makes

Organize your USB sticks and SD cards with this door shape holder. It has working handle. You need one paperclip for door hinges and a small spring or rubber band for door handle system.
For door window I used 0.5mm transparent plastic sheet, but if you have transparent filament use this to print window.
Assembly in video below. Some parts updated. Added spacer, which goes on the handle shaft between door and lock inside part.

Video: https://youtu.be/A3h-qUa8eOI

3D PRINTING SETTINGS

Layer height: 0.28mm for door casing
0.16 for small parts
0.2 for boxes and door
Infill: 15% or more
Speed: 45mm/s
Supports: Boxes need supports, others don't

drawers practical usb USB Holder USB stick holder useful useful 3d prints working handle

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

50 mm (Small)

Est. print time

3 h

Software

Cura, PrusaSlicer, or similar

Same designer, more platforms

3DPrintsBuilds also publishes on

3 additional models across 1 more platforms

Cults3D

3 models

♥ 83 ↓ 1,527

Frequently Asked Questions

Which 3D printer is suitable for USB and SD card holder?

Any FDM printer should handle USB and SD card holder just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

How long does it take to print USB and SD card holder?

According to the design notes, USB and SD card holder takes approximately 3 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is USB and SD card holder available in?

USB and SD card holder is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is USB and SD card holder free to download?

Yes, USB and SD card holder is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

USB and SD card holder

Similar Models

Add to Collection