USB-C Charging Cable Hole Bushing

Bushing to cover sharp edges of a hole cut into a metal box (~1mm thick), to protect USB-C cable running through it to charge a device (e.g. in a lockbox).

Printing Notes:
- Brim recommended

Installation:
- Make sure the Insert Piece will fit inside the Plate piece
- Use the Plate piece to trace out the hole to be cut (Approximately 17mm x 11mm)
- Use a dremel or preferred tool to cut the hole
- Optional, file down the corners and edges
- Glue the pieces in place, I used Barge to get a little bit better fill in the gaps and seal between the metal and the PLA.

Versions
- Plate v0 modeled to fit but the print was too tight
- Plate v1 enlarged and worked like a charm

Tinkercad model is here; feel free to copy and modify.
https://www.tinkercad.com/things/bmYE2Is9gqH-usb-c-cable-bushing/edit?returnTo=https%3A%2F%2Fwww.tinkercad.com%2Fdashboard&sharecode=kK5c2vp5RuDCoj8M0LwJ2Xqaqf568ZKBzowG5taIpG8