Thingiverse

USB-C Right-angle connectors

von DockGuy

28 Downloads

34 Likes

0 Makes

updated models:
https://www.printables.com/model/35716-usb-c-right-angle-connectors

-----

Two models of generic USB-C right-angle connectors/extenders/port-savers that can be used in rough Boolean operations for 3D-modeling.

* USB-C Receptacles are: 8.5mm x 2.5mm x 8mm
* USB-C Plugs are: 8.5mm x 2.5mm x 7mm

Type 1 model:
* [purchase link for type-1](https://is.gd/qJU2A2)
* exterior plug/receptacle housing dimensions are: 12.75mm x 6.5mm

Type 2 model:
* [purchase link for type-2](https://is.gd/FI7WFY)
* exterior housing dimensions are: 12.5mm x 6.5mm (receptacle) and 11.5mm x 6.5mm (plug)

Note: generic connectors may not meet [USB-IF specifications](https://www.usb.org/usb-type-cr-cable-and-connector-specification). Low quality specimens may not be appropriate for 100W (20V @ 5A) power delivery (no identifier chip) and insertion losses may reduce effective bandwidth for SS-10 / SS-20 connections.

connector extension port port-saver port saver right-angle right angle Type-C USB Type-C USB-c usbc connector extension port port-saver port saver right-angle right angle Type-C USB Type-C USB-c usbc

Quelle

Thingiverse

Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz

Einteilig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 0/3

Drucker

FDM / FFF

Dateiformat