Thingiverse
USB Desk Lamp
door seabirdhh
66
Downloads
73
Likes
0
Makes
This is another version of my lamp creations, as there are the already published „box shape“ lamp https://www.thingiverse.com/thing:4149214 and the „tube shape“ lamp https://www.thingiverse.com/thing:4179301. Now this lamp is bigger (approx. H44xL15xW15cm) and has become sort of disc head (Ø 140mm) and the backside a switch and a dimmer. Now - with the 5V USB LEDs - I can say that the dimming works very good.
In my opinion, the biggest difficulties in this project are the sawing of the tinplate base and the polycarbonate glass (I did both with a fretsaw - saw blade no. 5) as well as the soldering of the cut LED strips. The cutting plan you find here: USB_Lamp_Tinplate_cut.pdf
The cut polycarbonate glass must be pressed into the front ring from the front (!) at a slight angle. I fixed the glass at the outer edge with some small drops of all-purpose glue.
I have tried to capture some of the working steps and the assembly in photos. The assembly in many parts is identical with "B
In my opinion, the biggest difficulties in this project are the sawing of the tinplate base and the polycarbonate glass (I did both with a fretsaw - saw blade no. 5) as well as the soldering of the cut LED strips. The cutting plan you find here: USB_Lamp_Tinplate_cut.pdf
The cut polycarbonate glass must be pressed into the front ring from the front (!) at a slight angle. I fixed the glass at the outer edge with some small drops of all-purpose glue.
I have tried to capture some of the working steps and the assembly in photos. The assembly in many parts is identical with "B
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
