Learning
Ver Modelo
USB Digital Microscope Stand (Mostly Printable Parts)
122
Descargas
118
Likes
0
Makes
Short Briefs of Thing
---------------------------
This USB Microscope stand provides 4 different assembly styles, and give you the freedom of using a USB Microscope in different operation requirements or other accessories. The original stand from the vendor, which sucks, with a very short work distance.
The working distance of this design is movable by releasing the stuck latching on the back side of the lever, which is pushing by a spring. Pull the latch and move lever up and down to adjust the working distance. The design of the gear rail on the column is a module 1.2 mm one. It has around 4mm (actually, 3.77mm) pitch. It's not that much in detailed movement, but it stronger and easier printing by must of the 3DP. After defined the working distance, you can adjust the focus on your USB microscope.
The cable hook on the top of the column can hold the cable well.
Equipment Needed
---------------------------
螺絲
M3x12 screw 2pcs, for fixing stand and column (not necessary)
---------------------------
This USB Microscope stand provides 4 different assembly styles, and give you the freedom of using a USB Microscope in different operation requirements or other accessories. The original stand from the vendor, which sucks, with a very short work distance.
The working distance of this design is movable by releasing the stuck latching on the back side of the lever, which is pushing by a spring. Pull the latch and move lever up and down to adjust the working distance. The design of the gear rail on the column is a module 1.2 mm one. It has around 4mm (actually, 3.77mm) pitch. It's not that much in detailed movement, but it stronger and easier printing by must of the 3DP. After defined the working distance, you can adjust the focus on your USB microscope.
The cable hook on the top of the column can hold the cable well.
Equipment Needed
---------------------------
螺絲
M3x12 screw 2pcs, for fixing stand and column (not necessary)
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!