Thingiverse
USBASP ISP case
door petiepooo
4
Downloads
2
Likes
0
Makes
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/bbCyYTVkRR5
This thing is a case for a USBASP AVR ISP programmer such as
http://www.electrodragon.com/product/8051-avr-mcu-programmer-usbasp/
There is a window for viewing the two LEDs, and a relief dent for the crystal. If your USBASP has the crystal in a different position, you will need to edit it and move it to the correct place.
There are no latches. The best solution is to use a little hot-glue to hold the case to the USBASP board.
The thin rectangle beside it is to waste some material while my cheap printer figures out how to control the temperature; feel free to take it out on any remixes.
This thing is a case for a USBASP AVR ISP programmer such as
http://www.electrodragon.com/product/8051-avr-mcu-programmer-usbasp/
There is a window for viewing the two LEDs, and a relief dent for the crystal. If your USBASP has the crystal in a different position, you will need to edit it and move it to the correct place.
There are no latches. The best solution is to use a little hot-glue to hold the case to the USBASP board.
The thin rectangle beside it is to waste some material while my cheap printer figures out how to control the temperature; feel free to take it out on any remixes.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!