Thingiverse
uStepper Nema23 bracket
par nic6911
29
Téléchargements
30
Likes
0
Makes
A Nema23 bracket for the uStepper. The uStepper is originally designed to fit on a Nema17 stepper motor, but has the capability to run a Nema23, so therefore I made a bracket for it!
On the back of the Nema 23 there should be 4 holes spaced 32mm on one side and 51mm on the other side (center to center). These four holes should be M3 and with a depth of 1.8mm.
See a video of uStepper doing closed loop control on a 3D printer (with Nema17 though) here: https://www.youtube.com/watch?v=oidiMjSqiBU
Switching to an application using Nema23 does not change anything with regards to the feedback algorithm, making it possible to use also on larger machines.
Or visit www.uStepper.com for more info.
On the back of the Nema 23 there should be 4 holes spaced 32mm on one side and 51mm on the other side (center to center). These four holes should be M3 and with a depth of 1.8mm.
See a video of uStepper doing closed loop control on a 3D printer (with Nema17 though) here: https://www.youtube.com/watch?v=oidiMjSqiBU
Switching to an application using Nema23 does not change anything with regards to the feedback algorithm, making it possible to use also on larger machines.
Or visit www.uStepper.com for more info.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
