UW Husky

by the_bearded_jedi

46 Downloads

17 Likes

26 Makes

Download Model

uw washington husky hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.7mmFilaments Used:PLA+ ESun Black Transmission Distance: 0.3PLA Polylite Starlight Nebula Transmission Distance: 2.9PLA PolyTerra Savannah Yellow Transmission Distance: 3.5PLA Matte White Transmission Distance: 6This print uses 4 unique filaments Swap Instructions:Start with