Thingiverse
V0.2 AWD Experimental
di smolboi
4
Download
4
Likes
0
Makes
UNTESTED AWD mod for the V0.2
You'll need 4xidentical nema14, 8x m3-30mm, 2x20t 5mm id pulleys and one of each printed part to replace the front idlers, front panel mounting and a custom split front door (cad model included).
You will also need an mcu that can support at least 6 stepper drivers or dual mcu's. If adding a second mcu, make sure to put all 4 xy steppers on the same mcu.
Print with standard voron settings or increase perimeters. See image for print orientation of all parts.
https://github.com/VoronDesign/Voron-0
Don't worry about funny guy
You'll need 4xidentical nema14, 8x m3-30mm, 2x20t 5mm id pulleys and one of each printed part to replace the front idlers, front panel mounting and a custom split front door (cad model included).
You will also need an mcu that can support at least 6 stepper drivers or dual mcu's. If adding a second mcu, make sure to put all 4 xy steppers on the same mcu.
Print with standard voron settings or increase perimeters. See image for print orientation of all parts.
https://github.com/VoronDesign/Voron-0
Don't worry about funny guy
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
