Valentines Bookmark

Valentine's Bookmark Guide to print: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm - The Model is 150x60mm in size (if you wish to re-scale, make sure to not change the Z values)You may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mm Filaments Used: PLA Black PLA Red PLA WhiteThis print uses 3 unique filamentsSwap Instructions (see above): Start with Black At layer #09 (0.96mm) swap to Red At layer #12 (1.2mm) swap to White for the rest. For adding text to the bookmark via Bambu Studio: Once imported, select the item and then select the Text Shape Icon, see below settings: In the above example, the text is 0.32mm thick, therefore, as each layer is 0.08mm height, the last four layers relate to the text and therefore you should change colour accordingly: Additional note: Avoid using thin text unless you choose to print with 0.2mm nozzle. Boost MeIf my work brings yo