Valentines

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA PolyLite White Transmission Distance: 3.8 PLA PolyLite Pink Transmission Distance: 3 PLA PolyLite Pro Light Red Transmission Distance: 1 PLA PolyLite Purple Transmission Distance: 0.5This print uses 4 unique filamentsSwap Instructions: Start with White At layer #18 (0.84mm) swap to Pink At layer #29 (1.28mm) swap to Light Red At layer #41 (1.76mm) swap to Purple for the rest.