Slicer Discord
Valveless Pulse Jet – Modello 3D stampabile da Thingiverse Thingiverse

Valveless Pulse Jet

0 Download
1 Likes
0 Makes
Vai al Modello
### Optimized Lockwood-Hiller Style Valveless Pulse Jet.
##### Print V9 for best results.



---

**Update:** V9 runs well on gasoline with canned air. See the video below for reference. Will slightly pulse without air assist when running on isopropyl alcohol. A small amount of air assist results in decent reciprocation.

I would highly recommend PPE, goggles, gloves, and a respirator if possible. If you use compressed air from an air compressor, it is probably better for you. The terrible smell is very bad to breathe in. Use in a well-ventilated area. Do not run it if you value your arm hair.

---

**Video of it running: **

https://youtube.com/shorts/uwhEAB0an6s

---

**Tips to get it to run:**
- Spray fuel into the combustion chamber and swirl it around so it fumes. This makes initial ignition easier. Be prepared for a large backfire.
- Blow air into the intake (the smaller hole). Sometimes you may need to blow it out into the exhaust; if there's too much smoke inside, it'll snuff
Fonte
Thingiverse
Cosa serve per stampare: Principiante Bassa affidabilità
Pezzo unico
Supporti 1/3
Assemblaggio 0/3
Impostazioni 1/3
Dimensioni piano 0/3
Post-lavorazione 0/3
Stampante
FDM / FFF
Formato file
STL
Materiale
Wood PLA
Software
Cura, PrusaSlicer o simile
Ancora nessuna valutazione
Ancora nessun commento – sii il primo!
Feed Blog Slicer Calcolatore Ricerca per immagine Invia Contatto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Aggiungi alla collezione