vault 4 locking vault

Don&#39;t wait until its too late reserve your spot today! Assembly instructions slide the vault door into the drawer from the outside2. pre-screw 4 3mx8 screws into crossbar holes3. while holding the door in place flip drawer onto face and screw crossbar into vault door4. place springs in holes in interior door panel depending on the strength of the springs you are using use up too 4 I used 2 5. turn drawer face up to more easily align interior door panel with exterior panel without springs falling out6. pre screw 4 3Mx8 screws into door guard ensuring the screws are going into the side with the overhang7. while maintaining pressure on the internal door panel to keep springs compressed screw the door guards onto the drawer in the holes provided8. place the one locking bar through the hole at the top of the drawer and one through the bottom then using 2 3Mx6 screws ran through the locking rod axis screw bars into place <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000