Vegeta bookmark

https://www.patreon.com/cw/3D_MENTIEL Si vous aimez mon travail, venez faire un tour sur mon Patreon Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 50x150mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.2 #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #69ffff PLA Generic Cyan Transmission Distance: 3.6 #ce2406 PLA Forshape red Transmission Distance: 5.3 #f7e735 PLA Forshape+ Yellow Transmission Distance: 7.1 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 6 unique filaments Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue At layer #9 (0.8mm) swap to Cyan At layer #11 (0.96mm) swap to Black At layer #13 (1.12mm) swap to red At layer #16 (1.36mm) swap to Yellow At layer #18 (1.52mm) swap to Jade White At layer #20 (1.68mm