Vegeta Portrait

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmYou may print at higher layer heights below the Min Depth of 1.2mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA bambulab orange Transmission Distance: 5 PLA BambuLab Matte Ivory White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #16 (1.36mm) swap to orange At layer #17 (1.44mm) swap to Black At layer #19 (1.6mm) swap to Ivory White At layer #21 (1.76mm) swap to orange At layer #24 (2mm) swap to Ivory White for the rest.