vegeta street

modèle 7 couleurs Project: Vegeta street artPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.5x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.1 PLA BambuLab Basic Blue Transmission Distance: 2.9 PLA BambuLab Matte Marine Blue Transmission Distance: 0.1 PLA BambuLab Basic Magenta Transmission Distance: 3.2 PLA BambuLab Basic Jade White Transmission Distance: 5.9 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue At layer #9 (0.8mm) swap to Marine Blue At layer #11 (0.96mm) swap to Magenta At layer #15 (1.28mm) swap to Jade White At layer #16 (1.36mm) swap to Red At layer #18 (1.52mm) swap to Yellow At layer #22 (1.84mm) swap to Jade White for th