Velleman K8200 MKS Base Conversion

This is a guide on how to add and convert the Velleman K8200 printer to using the MKS Base CPU board.

What you'll need:

1 x printed MKS Base mount (from above file)
6 x M2x16 screws & nuts
1 x MKS Base board (preferably v1.4 or v1.5)
1 x RepRap Discount Smart Controller (optional)
1 x MKS Base TFT (optional)
1 x 12V/24V fan (optional)
2 x XH2.54 2 pin female headers with cables (red and black)
3 x XH2.54 3 pin female headers with cables (red, black, yellow)
5 x XH2.54 4 pin female headers with cables (white, yellow, black, red)
Thin cables for wiring extensions
Heat shrink sleeves
Soldering iron
Solder
Cable ties
Arduino software for adjusting Marlin settings

Instructions:

1) Remove and desolder all existing header cables from old Velleman board, marking each cable is for which function. ie. X, Y, Z, E1, Fan, Zmin, Ymin, Xmin, Heater etc.

2) Attach MKS Base to mount and attach to printer.

3) Cable soldering, use 2 pin headers for thermal, 3 pin headers f