Thingiverse
Vented Router Shelf
von willbradley
14
Downloads
12
Likes
0
Makes
Laser cut shelving cabinet system for routers, switches, firewalls, NASes, home labs, etc. There's integrated fan ventilation, air filtering, adjustable shelves, and basic cable management hooks.
Use 3/16" (5mm) plywood. The front door is optional but will allow you to add two front fans and put an air filter in front of the fans to keep dust/hair/etc out.
The fan grilles are sized for 200mm fans. Two for the back and two for the optional front. You'll want some sort of power supply for them since it's unlikely that you'll have Molex or 3-pin power just hanging around naturally. I cut up a spare 12v DC "wall wart" transformer and soldered it up to a bit of Molex. Make sure the transformer has enough amperage for all the fans you plan to use.
If you choose to have a front door, cut-to-fit air filters can be purchased cheaply from any home improvement or online outlet. The filter should be no more than 1cm or 1/4" thick, at least 27cm / 10.5" wide, and 45cm / 17.5" tall. You als
Use 3/16" (5mm) plywood. The front door is optional but will allow you to add two front fans and put an air filter in front of the fans to keep dust/hair/etc out.
The fan grilles are sized for 200mm fans. Two for the back and two for the optional front. You'll want some sort of power supply for them since it's unlikely that you'll have Molex or 3-pin power just hanging around naturally. I cut up a spare 12v DC "wall wart" transformer and soldered it up to a bit of Molex. Make sure the transformer has enough amperage for all the fans you plan to use.
If you choose to have a front door, cut-to-fit air filters can be purchased cheaply from any home improvement or online outlet. The filter should be no more than 1cm or 1/4" thick, at least 27cm / 10.5" wide, and 45cm / 17.5" tall. You als
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
