Ventus W132 - Replacement anemometer

Unfortunately, there are no longer any spare parts available for the Ventus W132 weather station. When a wing of the anemometer broke off at my station, I reconstructed it 1:1 for 3D printing.

Since it is foreseeable that an impeller can break here too, I have also designed two versions in which the connections are made of brass - one with a 3 mm round rod and one with a 4 mm round tube.
The dimensions of the anemometer correspond to those of the original - the length of the connectors should be 27.5 - 28 mm. The connectors are inserted with glue and the wind blades are aligned perpendicular to the vertical. In order for the whole thing to be weatherproof, the entire construction must be treated with UV-resistant acrylic clear varnish.

- Round brass rod 3 mm diameter:
Bauhaus - Kantoflex Rundstange
Ø x L: 2,9 x 1.000 mm, Messing - 1,65 €
https://www.bauhaus.info/metallprofile-kunststoffprofile/kantoflex-rundstange/p/20016740
- Round brass tube 4 mm diameter
Bauha