MakerWorld

Gadgets

Vertical Floating Skateboard Deck Hanger

von BATTCAVE · Gadgets

201 Downloads

107 Likes

141 Makes

Vertical Floating Skateboard Deck HangerA sleek wall hanger for skateboard decks. Holds the deck 57mm away from the wall so suitable for boards with 56mm or less kick. Optional insert washers protect the art on collectible decks. Required two 4mm X 30mm button head screws. (see BOM) Prints best in PETG-CF but will also work fine in PETG or PLA+. Regular PLA will sag pretty quickly but worst case the tail touches the wall. Insert washers are great in PLA+. Chase the threads with the hardware then mount the hanger to the wall and install your deck. Just snug is plenty tight. Two Profiles - The Hanger & The Insert Washers. Example printed in Bambu Lab PETG-CF

art bambu bambu lab collectibe display float floating hang hanger limited mount sk8 skate skateboard slateboarding wall

Kategorie

Gadgets

Quelle

MakerWorld

Veröffentlicht

05.09.2025

Aktualisiert

30.04.2026

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat

STL

Material

PLA, PETG, Carbon Fiber

Nachbearbeitung

Hardware

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Vertical Floating Skateboard Deck Hanger

Ähnliche Modelle

Zur Sammlung hinzufügen