Vertical Laptop Stand

A space-saving laptop stand that allows the laptop to stand vertically, optimizing desk space. The gap in the model is 20 mm. I've also used felt pads inside on both sides to avoid scratches One felt pad is 2 mm thick. So if your laptop's thickness + 2 felt pads (one on each side) are more or less than 20 mm, you can scale the model in the slicer and make it fit to your case. To do this;Determine Your Laptop Thickness:First you need to measure the thickness of your laptop. Calculate Desired Thickness:If you're also gonna use felt pads, you need to add their thickness to your laptop. If not, then just don't include them in the formula. So let's say if your laptop is 22 mm thick, then your desired thickness is 26 mm with the felt pads. But I would suggest decreasing it by 1 mm for a snug fit. Which would make the final value 25 mm, for this example. Calculate the Scaling Factor:Now, to do that you can use this formula: (Desired thickness / 20) x 100 = Scaling factor.F