Vertical Stand for portable 14" Display

This is an vertical stand for the Arzopa A1 GAMUT SLIM portable 14" Monitor (the one with the flappy magnetic folio-stand).The stand should fit many other models with the same design.I've made an cutout for one of the USB-C Ports, to allow a single cable to be connected. A hole below the cutout makes plugging in the cable easy.You either need an USB-C cable with an 90° angle connector or an 90° Adapter (like this one). The opening should be big enough for most common cables and adapters.The fit is design to be very tight (due to the rubber feet), as I need it to be secure in place.I've added another Print profile (Loose Fit - with 192mm space) with the right wall pushed in by 1mm, so the display should slide in very easily - be aware, the F3D file is with the tight fit!If you need the other usb-c port or the mini-HDMI port, you can just move the 18mm cutout in the CAD file… or add more, as HDMI alone won't get power. I won't judge ;-). I decided to go with a single