Thingiverse
Vesa Universal Desk Stand Screwless
par correasfe
6
Téléchargements
19
Likes
0
Makes
Screwless vesa desk stand for monitor 100x100mm (can be remixed for bigger)
****** Print at your own risk ******
I used 5 lines of wall with 15¨% infill PLA.
Depend on direction of your print you must use suports or rafts.
In the midle, I used a 28.5 mm coat rack alluminiun tube (found in any home depot).
Can be remixed for bigger tubes.
Caution: The longer the tube, the larger the base must be
The model I made available, I used a 38cm tube.
****** Print at your own risk ******
I used 5 lines of wall with 15¨% infill PLA.
Depend on direction of your print you must use suports or rafts.
In the midle, I used a 28.5 mm coat rack alluminiun tube (found in any home depot).
Can be remixed for bigger tubes.
Caution: The longer the tube, the larger the base must be
The model I made available, I used a 38cm tube.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
