Viking Charge HueForge with frame

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.68mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #906b4b PLA BambuLab Matte Caramel Transmission Distance: 1.5 #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4 #8bd5ee PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 7 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue Gray At layer #9 (0.8mm) swap to Caramel At layer #11 (0.96mm) swap to Sunflower Yellow At layer #13 (1.12mm) swap to Ice Blue At layer #15 (1.28mm) swap to Yellow At layer #18 (1.52mm) sw