viking helmet hueforge

I got tired of searching through the hueforges here, and other sites, finding something cool, downloading and finding out something was jacked up on the print, or printing it and having wasted hours for a piece of junk. So, i started making my own. I hope ya'll find this as fascinating as i do. One thing I've learned in my hueforge journey, LAYER HEIGHT, INFILL AND INITIAL LAYER THICKNESS MATTER!!!!!!! I'll be adding my creations as time allows, have about 10-15 more I “cut my teeth on” and all of them have turned out as amazing as this one. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeActual Depth is 2.2mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA+ Sunlu Red Transmission Distance: 6 PLA+ Sunlu Light Gold Transmission Distance: 3 PLA+ Sunlu White Transmission Distance: 5 Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blu