Thingiverse
Vivilink/VanTop rear camera window case
por IamSLy
15
Descargas
8
Likes
0
Makes
Case for mounting the rear view camera of the Vivilink/VanTop dash cam directly on the rear window.
Limitation: designed for rear windows that are close to vertical.
Downwards Slant Angle is parametric in Onshape: https://cad.onshape.com/documents/e8f55711fa27770a1eeec703/v/e5942c2b57b00328943a6fd5/e/d35997832f2da28dbd0fec3b
Slant Angle here is optimised for Expert 3/Vivaro C/Jumpy 3/ProAce 2
Printing:
Your slicer settings MUST have the "Horizontal Expansion" (Cura name) setting calibrated so that a X mm cylinder will fit into a X mm hole. This setting could have an other name in slicers other than Cura. A typical value for FDM printers is around -0.1mm. A more negative value will give a larger clearance.
This point is important as there is no clearance in the object dimensions!
Tool for calibrating your Horizontal Expansion setting: https://www.thingiverse.com/thing:4905876
STL FILES UPDATED ! Rotated the camera 180 deg as the reverse image was upside down and ther
Limitation: designed for rear windows that are close to vertical.
Downwards Slant Angle is parametric in Onshape: https://cad.onshape.com/documents/e8f55711fa27770a1eeec703/v/e5942c2b57b00328943a6fd5/e/d35997832f2da28dbd0fec3b
Slant Angle here is optimised for Expert 3/Vivaro C/Jumpy 3/ProAce 2
Printing:
Your slicer settings MUST have the "Horizontal Expansion" (Cura name) setting calibrated so that a X mm cylinder will fit into a X mm hole. This setting could have an other name in slicers other than Cura. A typical value for FDM printers is around -0.1mm. A more negative value will give a larger clearance.
This point is important as there is no clearance in the object dimensions!
Tool for calibrating your Horizontal Expansion setting: https://www.thingiverse.com/thing:4905876
STL FILES UPDATED ! Rotated the camera 180 deg as the reverse image was upside down and ther
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
